MR810 Humidifier for Ventilator - Fisher & Paykel

MR810 Respiratory Humidifier

Delivering heated humidification for noninvasive ventilation (NIV) in the home.

• Three temperature and humidity settings
• Integrated heater wire adapter
• Ambient temperature sensor
• Compatable with heated wire circuits
• Available in selected markets only

Improving comfort and tolerance to NIV for home-based patients.

Using the MR810 Respiratory Humidifier, a F&P humidification chamber and the Evatherm Heated Breathing Circuit, the F&P 810 system delivers humidity to patients requiring NIV at home. Heated humidification is highly suggested for use with NIV therapy for improved comfort.

The MR810 Humidifier is at the heart of the F&P 810 System.

This humidifier supplies, monitors and controls heat to the humidification chamber to heat the water it contains. As respiratory gas passes over the heated water, it increases in humidity and temperature.

It also controls heating in the heated respiratory circuits, such as the Evatherm Breathing Circuit. This heating maintains the surface of the breathing tube at a higher temperature than the humidified gas passing through, reducing the potential for condensation.

The F&P 810 System has the following features and benefits:

• Therapeutic levels of warm, humidified gas
• This active, heated humidifier is designed for use with a home ventilator to provide therapeutic levels of warm, humidified gas to patients.
• Temperature and humidity adjustment
• There are three incremental temperature levels (low, medium and high), which facilitate temperature and humidity adjustment.
• Condensate management
• An Ambient Temperature Sensor monitors room temperature to enable the humidifier to manage condensation in conjunction with the heated breathing circuit.
• No additional temperature probes
• The Ambient Temperature Sensor is built into the system while the heater-wire adapter comes permanently attached to the unit.